Typical solutions
New tanktruck loading terminal Čepro Loukov | 2020
EPC construction of new terminal with 16 arms at 4 loading places for all kinds of fuel with biofuels blending and additive dosing. Project included as well new manifold, piping, extension of control system TAMAS, CCTV, switch room, cabling, security system, fire detection. New fire fighting system with new fire water tank 500 m3.
Energetika Třinec - replacement of old turbo-compressor | 2019
The project scope covered design, removal of existing, install new and commission new electrical Turbo-Compressor with significant energy reductions increased efficiency leading to “Life Cycle” operational benefits. The project was run under a ‘Turn-Key’ basis.
New taktruck terminal and product pipeline for JET-A1 at Vaclav Havel Airport Prague | 2019
Vaclav Havel International Airport Prague is the biggest airport in Czech Republic with more than 15 million passengers per year. In this project was built completely new facility for tanktrucks for delivery of JET-A1 fuel to aircrafts. Our scope included technology for JET-A1 loading to tanktrucks (metering runs - SKIDs with flow computers Accuload IV incl. metrology approval according to MID, new control system, cabling and field instruments and additive dosing (conductivity improver) at terminal inlet. The scope included also complete design documentation.
Pipeline additive dosing unit | 2019
EPC project - design, production, delivery and start-up of container - based unit for dosing of additive (drag reducing agent) into high pressure product pipelines. Including integration to existing pipeline control system.
Construction of liquid storage in a new car production plant, Slovakia | 2018
Construction of a warehouse for operating fluids and piping into the assembly hall of the new Jaguar Land Rover production plant. The scope included construction of a liquid storage facility with 9 tanks for products and 1 tank for slop. The stored and pumped substances are: petrol, diesel arctic, diesel summer, brake fluid, screen wash, refrigerant R134A, AD
BLUE, antifreeze, refrigerant R1234YF.
Construction of a warehouse for operating fluids and piping into the assembly hall of the new Jaguar Land Rover production plant. The scope included construction of a liquid storage facility with 9 tanks for products and 1 tank for slop. The stored and pumped substances are: petrol, diesel arctic, diesel summer, brake fluid, screen wash, refrigerant R134A, AD BLUE, antifreeze, refrigerant R1234YF.
Pipeline additive dosing units for Cepro | 2018
Design, production, start-up of mobile units for dosing of additive - drag reducing agent into high pressure product pipeline.
Ships bunkering terminal for Alexela Slovag, Norway | 2018
Design, fabrication, commissioning of skids for delivery of fuel (diesel) to ships. The skids are certified according to MID and enable fast bunkering of marine ships.
Construction of fuel terminal Dongguan, China | 2017
Based on previously executed design, production, delivery and start-up of technology for tanktrucks loading and complete low-voltage part, including control and administration system TAMAS.
Extension of tanktruck and railcars loading terminal in Port of Koper | 2016
Design, production, installation and start-up of flow metering skids for loading of light products (incl. JET-A1) to tanktrucks and railcars with purpose to increase flexibility and capacity of the terminal. System includes also biofuels blending, additive dosing and colouring of selected products. Integration to existing ERP system is with the use of TAMAS system.
Modernisation of tanktruck terminal in Rijeka refinery | 2016
Design, production, installation and start-up of flow metering skids for loading of light and heavy products to tanktrucks. System TAMAS for automation and administration of the loading process including integration with existing ERP system and with automation system of related technology units.
Construction of JET fuel storage in Lielvarde, Latvia | 2015
Turn-key construction of new aviation fuel JET-A1 storage. The storage includes 2 tanks, tanktruck unloading place, 2 places for loading of tanktrucks, additive dosing system, control and automation system TAMAS.
Filtering and metering system for Atbara depot, Sudan | 2011
Skids 12" class 900 and 16" class 600 for filtration, pressure control and flow metering of diesel and gasoline in redundand design. Including intargation into existing SCADA system.
Reconstruction of Lukoil Bourgas Railway Terminal, 2008 | 2011
Delivery of containerized coloring system, system for measuring of loaded and unloaded products, and TAMAS supervising system.
Liquid commodities transship complex 6/8N, Cierna nad Tisou, Slovakia | 2009
Liquid commodities transship complex 6/8N situated in Čierna nad Tisou, right on the Slovak / Ukraine border is intended for transshipping of liquid commodities transported by wide gauge track railway tanks (Russian and Ukraine) to European gauge track railway tanks. The objective of the reconstruction was to meet legislative requirements for liquid commodities transship complexes mainly from the environmental point of view and also to fulfill requested capacity parameters.
Turnkey contractor Matoušek, VAE CONTROLS general contractor of technology part and PIK general designer.
Metering skids for Turkmenbashi complex of oil refineries, Turkmenistan | 2009
Design, fabrication and start-up assistance. Measuring and control of amount of products when loaded into ships. There are 14 metering skids for custody transfer of different oil products. The skids have been installed in the sea terminal in the Turkmenbashi complex for measuring and control of amount of products when loaded into ships.
NATO Roudnice - Tankfarm and terminal for diesel fuel, Czech Republic | 2009
Delivery, fabrication, assembly and commissioning of complex technology part of tankfarm and tanktruck terminal including auxiliary operations.
Prague airport, Rehabilitation of aviation fuel handling system, Czech republic | 2009
Basic and detail design, engineering, delivery (EPC) of technology and control system for handling JET-A1 on the biggest airport in the Czech republic - Prague airport. The system of aviation fuel handling consists of railway unloading facility, central tank storage with pumping station and tank trucks terminal. The 3 nodes are connected by underground pipeline. The purpose of this rehabilitation project was to ensure secure and fully reliable function of this system.
Shell aviation fuel loading terminal in Helsinki, Finland | 2009
Delivery of 8 grounding testers for tank truck loading.
State reserves, pipeline Hermanuv Mestec, Czech republic | 2009
Construction of new pipeline 4 x DN200 which connects 2 separated parts of one tankfarm of petroleum products.
Shanghai Pudong Airport, Additive dosing technology, China | 2008
Design, engineering, delivery of additive dosing system. The referenced facility is located in Pudong airport, one of the airports in the world. The fuel storage has been equipped with dosing system to manage increasing conductivity of Jet fuel. It is used for injection of additive agent into the product when unloaded from ships to the fuel storage at the airport. The EPC delivery included additive container with pumping skid and connection to current installation.
Lukoil Bulgaria, Tank truck loading terminal, Plovdiv, Bulgaria | 2007
Basic and Detail Design, engineering, EPC delivery on turn-key basis. The terminal has 4 loading bays for TOP and BOTTOM loading with capacity of 60 tank trucks loading per day.
CEPRO Sedlnice tankfarm, Czech Republic | 2006
Construction of a new tankfarm with capacity 100 000 m3 on EPC basis including complex design engineering services. The tankfarm includes also railway and tenktruck terminal.
SHELL Slovakia / Progress trading Trebisov, Tankfarm and terminal, Slovak Republic | 2006
Basic and Detail Design, engineering, EPC delivery Construction of a new tankfarm on turn-key basis. The Trebisov storage facility is the newest and the most modern storage facility.
Sinopec - Terminal Ningbo, China | 2006
Design, delivery and engineering of additive dosing system EVA6, additive pump station and loading arms on taktruck terminal.
Paramo refinery tankfarm and tank truck loading terminal, Czech Republic | 2005
Basic and Detail Design, engineering, EPC delivery on turn-key basis. The new facility consist two new tanks for gasoline, VRU, fire protection and extinguishing system system, extension of truck loading terminal and railway loading terminal.
Petrochemia Blachownia, Tank truck loading terminal, Poland | 2002
Basic and Detail Design, engineering, EPC delivery on turn-key basis of tanktruck terminal with 3 loading places for top and bottom loading with capacity of 2000 m3 per day.
OMV Komárno, Fuel depot, Slovak Republic | 2000
Basic and Detail Design, engineering, EPC delivery of fuel transshipment depot on turn-key basis. The depot ensures fuels unloading from barges, fuel storage and loading to railway cars and tan trucks.
